aluminum electrolytic capacitors (smd type) surface mount type series: medium-size fk type: v high temperature lead-free reflow (suffix : a?) endurance105 5000 h vibration-proof product (30g guaranteed) is available upon request rohs compliant example6.3 v.dc 3300 f marking color : black unitv.dc unitmm ?the dimensions of the vibration-proof products, please refer to the page of the mounting specification. within the initial limit 35 j a c e v 18.0 h13 j16 k16 aec-q200 compliant frequency correction factor for ripple current leakage current within the initial limit dissipation factortan ) 13.50.5 16.50.5 16.50.5 12.5 k size code 0.700.3 features specifications 2 2 2 2 2 2 80 2 please see the attached characteristics list capacitance range 47 f to 6800 f 63 category temp. range C55 to +105 rated voltage range 6.3 v.dc to 100 v.dc characteristics at low temperature rated voltage (v.dc) z (C25 ) / z (+20 ) z (C40 ) / z (+20 ) z (C55 ) / z (+20 ) 6.3 within 10 % of the initial value (impedance ratio at 120 hz) 3 2 2 capacitance tolerance 20 % (120 hz / +20 ) leakage current i Q 0.01 cva after 2 minutes dissipation factor (tan ) 16 25 35 50 100 shelf life endurance after applying rated working voltage for 5000 hours at +105 2 and the n being stabilized at +20 , capacitors shall meet the following l imits. capacitance change within 30 % of the initial value dissipation factortan ) Q 200 % of the initial limit leakage current 0.700.3 16.0 6.7 15.0 max. 19.0 max. 21.0 max. 13.5 17.0 19.0 0.700.3 4.4 6.7 6.7 0.900.3 1.200.3 1.200.3 marking frequency (hz) correction factor p k 50 63 w aec-q200 d l dimensions 100 k to 0.75 0.90 0.95 1.00 r. voltage code 17-apr-19 4 10 16 25 i 120 1 k 10 k 4.7 5.5 80 100 h ab h 2a 6.3 j capacitance change resistance to soldering heat should a safety concern arise regarding this product, please be su re to contact us immediately. 4 design and specifications are each subject to change without noti ce. ask factory for the current technical specifications befor e purchase and/or use. following limits. 3 3 3 3 3 3 10 after storage for 1000 hours at +105 2 with no voltage applied and th en being (with voltage treatment) within the initial limit 4 3 3 3 3 3 3 after reflow soldering and then being stabilized at +20 , capacitors shall meet the 3 3 stabilized at +20 , capacitors shall meet the limits specifi ed in endurance. 0.3 max. d 0.5 l h a 0.2 b 0.2 w i p i 3300 j fk pressure relief k negative polarity marking ( C) capacitance ( f) series identification rated voltage code lot number mark for lead - free products (black dot) reference size downloaded from: http:///
$ o x p l q x p ( o h f w u r o \ w l f & |